Caterpillar Forklifts & Cat Lift Trucks For Sale

Class I – Electric Counterbalanced 2,500-4,000 lb Capacity 3-Wheel Pneumatic Tire 3,000-4,000 lb Capacity Pneumatic Tire 3,000-4,000 lb Capacity Cushion Tire 4,500-6,500 lb Capacity Cushion Tire 5,000-6,500 lb Capacity Pneumatic Tire 8,000-11,000 lb Capacity Pneumatic Tire	Class IV – Internal Combustion Cushion Tire 3,000-6,500 lb Capacity 7,000-15,500 lb Capacity 8,000-15,500 lb Capacity Paper Handling Chassis	Class V – Internal Combustion Pneumatic Tire 3,000-7,000 lb Capacity 8,000-12,000 lb Capacity 8,000-12,000 lb Capacity – Mexico 15,500 lb Capacity 22,000-36,000 lb Capacity	Hand Pallet Pallet Jack
Cat® lift truck dealers carry a complete line of material handling equipment to meet your needs. If your application requires Class I Counterbalanced Trucks; Class II Reach Trucks or Order Pickers; or Class III Pallet Trucks, Walkie Stackers or Tow Tractors

	Cat Lift Trucks With load capacities ranging from 2,500 to 36,000 lbs., Cat Lift Trucks line of material handling equipment includes electric forklifts as well as internal combustion cushion and pneumatic tire forklifts. Built for diverse commercial and industrial applications, Cat lift trucks set the standard for the ultimate forklift experience. Learn More About Our Line Of Forklifts.
	Forklift Parts Whether you’re managing a few lift trucks or an entire fleet, you need quick access to the right parts. Our forklift parts programs allow you to keep your costs down and your lift trucks running at peak productivity. Learn More About Our Forklift Parts Programs.
	Rental And Used Forklifts Our top-rated dealer network is ready to serve your rental and used forklift needs, whether you’re looking for a diesel, electric or LP powered pneumatic or cushion tire lift truck. Flexible rental periods can range from one day to one month to years. Learn More About Our Rental and Used Forklift Equipment.

2,500-4,000 lb Capacity 3-Wheel Pneumatic Tire
2ET2500-2ET4000, Cat 3-wheel, Cat electric forklift, electric 3-wheel forklift

Combining the latest in operator ergonomics, advanced AC control systems and customized performance, the 2ET2500-2ET4000 Series three-wheel electric forklifts are up to any application challenge. Electric motors protected to IP54 and specially designed options such as operator cabins allow these lift trucks to operate in areas outside of traditional electric forklift applications.

Quality Reliability Customer Service Specs

Quality

Fully AC power steering provides significantly lower steering effort than conventional steering system
Standard fingertip controls offer precise control; a travel directional switch and horn are conveniently integrated into the fingertip module
Easy-to-read, cowl-mounted display panel includes information on service icons, directional indicators and performance modes
Improved visibility in all directions due to mast, overhead guard and counterweight design
Designed to maximize operator comfort and minimize fatigue:
Full-suspension seat and fully-floating cab design help reduce shock and vibration
Narrow steering column allows for ample leg room and can be adjusted in two planes – height and proximity
Anti-cinch seat belt permits the operator to turn easily when travelling in reverse

Available Options

Joystick control
Operator cab
Light and strobe packages for your specific application

3,000-6,500 lb Capacity LP Gas Cushion Tire
gas cushion tire forklift, gas Cat lift truck,

These rugged, compact lift trucks come with fuel-injected purePower® engines that provide excellent horsepower and torque in hard-working material handling environments. The fuel management system optimizes fuel economy and extends tire life with the Fuel Saver Mode while meeting EPA and CARB requirements for carbon monoxide (CO), hydrocarbons (HC) and nitrogen oxide (NOx) emissions.

Quality Reliability Customer Service Specs

Quality

LED front work lights and rear combination lights burn brighter and last longer than conventional lights
Floating Powertrain reduces noise and vibration from the engine, helping to reduce operator fatigue
Fully hydrostatic steer axle provides exceptionally lower steering effort than conventional steering systems
Designed to maximize operator comfort and minimize fatigue:

Full-suspension vinyl seat resists shock and vibration
Generous floor area with through-the-floor pedal design, which helps promote natural motion
Return-to-set memory tilt steering column remembers operator preferences
Ergonomic controls are conveniently placed for easy access
Anti-cinch seat belt permits the operator to turn easily when travelling in reverse

Available Options

Swing down LP tank bracket – helps significantly reduce the effort it takes for an operator to change an LP tank
Seat and seatbelt ignition interlock – engine will not run unless the operator is in the seat with the seat belt fastened
Rear handle with horn button – better operator support when driving in reverse
Light and strobe packages for your specific applications

3,000-7,000 lb Capacity Internal Combustion Pneumatic Tire
Cat pneumatic, 2P3000-2P7000, 2PD4000-2PD7000, Cat forklift, Cat lift truck

These heart-of-the-line forklifts are built for harsh, rugged applications, without sacrificing operator comfort and convenience. With an advanced on-board diagnostic system, ground speed control and the Fuel Saver Mode, the 2P3000-2P7000/2PD4000-2PD7000 series provides dependable material handling performance with a highly-efficient fuel system for optimum productivity.

Quality Reliability Customer Service Specs

Quality

Presence Detection System (PDS) helps protect operators and loads by disengaging transmission and hydraulic functions when the operator leaves the normal seated position or the parking brake is not set
LED front work lights and rear combination lights burn brighter and last longer than conventional lights
Floating Powertrain reduces noise and vibration from the engine, helping to reduce operator fatigue
Fully hydrostatic steer axle provides exceptionally lower steering effort than conventional steering systems
Informative LED/LCD display panel is mounted to the steering column and keeps operators informed
Designed to maximize operator comfort and minimize fatigue:
Full-suspension vinyl seat resists shock and vibration
Generous floor area with through-the-floor pedal design, which helps promote natural motion
Return-to-set memory tilt steering column remembers operator preferences
Ergonomic controls are conveniently placed for easy access

Available Options

Fingertip hydraulic controls – offer precise control with near effortless motion
Full-suspension swivel seat – turns 12° to the right, allowing more natural movement for the operator when traveling in reverse
Swing down LP tank bracket – helps significantly reduce the effort it takes for an operator to change an LP tank
Seat and seatbelt ignition interlock – engine will not run unless the operator is in the seat with the seat belt fastened
Closed operator cab – provides operator protection against the elements
Rear handle with horn button – better operator support when driving in reverse
Light and strobe packages for your specific applications